6 wire straight through cable.

Popular name for the standard four-wire modular connector for phone connections.

Four-wire modular connectors for phone lines.

Wiring jack commonly used in U.S. telephone systems and modems worldwide.

Four-conductor modular connector used for modern one- and two-line telephones. plug socket

Registered Jack number 11. Small line plug and socket used on telephone handsets and modem connections.

Most common telephone jack; 6x plug with 4 connectors.

The standard telephone jack and plug. Used on all EasyLink dialers.

Standard telephone jack (6 pins).

A 4 pin connector used for voice and/or data transmission over standard copper telephone cable.

A type of telephone connector. Standard in the US.

Four or six-wire connector used for phone connections. Use RJ11 to connect a phone line to the LINE connector of the Network Adaptor.

This is the standard end connector for any telephone cable. Note: You cannot use a RJ11 cable in a RJ45 slot.

The standard for a modular telephone jack on a home telephone and is called a permissive connection by the telephone company. Although it generally is used on two-wire circuits, it can be used on four-wire circuit.

A wiring pattern for 6-position modular jacks.Used to refer to the jacks themselves.

is a standard phone outlet jack with 4 wire connections.

Standard jacket for telephone line interface.

A 4 position modular jack most commonly used for phone connections. The standard single line phone uses only 2 of the 4 wires.

RJ11 (which stands for Recommended Jack 11) is the standard type of connection plug used to connect most modems to the telephone line. This is a small square plug, which can accommodate up to 6 wires, although typically only four are used for telephone connections.