The interdomain routing protocol implemented in Transmission Control Protocol/Internet Protocol (TCP/IP) networks. See TCP/IP.
The predominant interdomain routing protocol used in IP networks.
Inter-domain routing protocol that exchanges reach ability information with other BGP systems. Used to autonomously route IP packets of information over the Internet. Bounce When e-mail is undeliverable and sent back to the sender (bounced) so that the sender will know it was not delivered. The sender can determine the problem and resend.
Boarder Gateway Protocol Version 4, an interdomain routing protocol that more efficiently distributes packets between independent networks than the older EGP (Exterior Gateway Protocol).
Border Gateway Protocol. Protocol for communications between a router in one autonomous system and routers in another.
Border Gateway Protocol. Used to exchange routing information between AS
Border Gateway Protocal. This is a routing protocol.
Used by gateways in an internet connecting autonomous (router) networks. It is defined in RFC 1771.
Border Gateway Protocol. Border Gateway Protocol (BGP) is the protocol used to determine how to route data from one point on a network to another. At it's simplest, BGP says that a certain IP is controlled by a certain AS, then the router looks to see the closest AS in it's table to get to the end point, the data is handed to that network, and the cycle continues until the end point is reached.
See "Border Gateway Protocol"
Border Gateway Protocol. Intelligent routing software which can identify which path is the most efficient for each data packet, and then route the packet to its destination on the fastest path.
BGP (Border Gateway Protocol) is a protocol for exchanging routing information between gateway host (each with its own router) in a network of autonomous system. BGP is often the protocol used between gateway hosts on the Internet. The routing table contains a list of known routers, the addresses they can reach, and a cost metric associated with the path to each router so that the best available route is chosen.
Border Gateway Protocol. A protocol, defined in RFC 1163 and later refined in RFC 1771, that allows the exchange of packets between networks, such as a company intranet and the Internet.
Border Gateway Protocol (BGP) is an inter-Autonomous System routing protocol. The current version of BGP is BGP-4.
Border Gateway Protocol, more information ...
Border Gateway Protocol version 4 _ information exchange protocol between ISPs used to determine how to route packets between them
Border Gateway Protocol. A routing protocol used between autonomous systems. It is the routing protocol that makes the internet work. BGP is a distance-vector routing protocol that carries connectivity information and an additional set of BGP attributes. These attributes allow for a rich set of policies for deciding the best route to use to reach a given destination.
Border Gateway Protocol. The Border Gateway Protocol is an exterior gateway protocol defined in RFCs 1267 and 1268. It's design is based on experience gained with EGP, as defined in STD 18, RFC 904, and EGP usage in the NSFNET Backbone, as described in RFCs 1092 and 1093. See also: Exterior Gateway Protocol.
Border Gateway Protocol. This is the protocol used by the core routers on the Internet to route TCP/IP packets. BGP replaces the older Exterior Gateway Protocol. Core routers that use BGP exchange routing information to determine optimal routing paths and also exchange TCP/IP data packets.
Border Gateway Protocol: Used instead of “hop count” to determine how many “autonomous system hops” would be required when routing a packet. A large autonomous network (such as UUNET or MCI) would count as only one hop, since their network can span a great distance. Regular hop count (as seen in traceroute) counts each router—which would skew the results.
Border Gateway Protocol (protocole à vecteurs de chemin)
Border Gateway Protocol. Interdomain routing protocol; exchanges reachability information with other same system-type routers in an Internet core router applications.
Border Gateway Protocol (often written as "BGP4")
Border Gateway Protocol (protocol of border footbridge) Protocol that is used in the Internet between routers of a same independent system (IBGP) or of different independent systems (EBGP) to interchange rutado information of.
(n.) border gateway protocol.
Border Gateway Protocol - exterior routing protocol that is starting to replace EGP.
Border Gateway Protocol. A routing protocol designed for use between autonomous systems and especially useful to detect routing loops. (See the BGP version 4 specification in RFC 1654.)
Border Gateway Protocol: Routing protocol designed for interdomain routing
The Border Gateway Protocol (BGP) is an inter-Autonomous System routing protocol. The primary function of a BGP speaking system is to exchange network reachability information with other BGP systems.
Border Gateway Protocol. An inter-autonomous system routing protocol. The "next generation" EGP. See EGP.
Border Gateway Protocol. BGP is an external routing protocol.
Border Gateway Protocol. A protocol used to advertise the set of networks that can be reached within an Autonomous System. BGP enables this information to be shared with other Autonomous Systems.
(Border Gateway Protocol) an Internet protocol that enables groups of routers (called autonomous systems) to share routing information so that efficient, loop-free routes can be established. BGP is commonly used within and between Internet Service Providers (ISPs).
(Border Gateway Protocol) is a routing protocol that enables groups of routers (called autonomous systems) to communicate and share routing information establishing efficient, loop-free routes while using their own internal routing policies. BGP is commonly used within and between Internet Service Providers (ISPs). For customers, BGP allows for using unique routing policies internally, as well as connecting to multiple ISPs. The protocol is defined in RFC 1771. BIOS
Border Gateway Protocol. A routing protocol used in interdomain routing in large networks to maintain integrity of the network. It allows the routers to exchange only prespecified information with prespecified routers in other domains.
Sends Border Gateway Protocol (BGP) state change notifications.
Border Gateway Protocol. A routing protocol whose function is to exchange network reachability information with other BGP or EGP routers located in different ASs.
Border Gateway Protocol. The core routing protocol of the Internet. It works by maintaining a table of IP networks or 'prefixes' which designate network reachability between autonomous systems (AS).
Border Gateway Protocol. Exterior gateway protocol used to exchange routing information among routers in different autonomous systems.
The Border Gateway Protocol (BGP) is used to exchange routing information for the Internet and is the protocol used between Internet service providers (ISP).
Border Gateway Protocol. Interdomain routing protocol that replaces EGP. BGP exchanges reachability information with other BGP systems. It is defined by RFC 1163. See also BGP4 and EGP.
Border Gateway Protocol. A protocol in the IP suite designed to exchange network reachability information with other BGP systems in other autonomous systems. BGP speakers provide routing updates including a network number, a list of autonomous systems that the routing information has passed through, and a list of other path attributes. BGP4 replaces the original BGP3, although both are supported by Bay Networks.