Formation and separation of laminæ or layers; one of the methods by which the various blastodermic layers of the ovum are differentiated.
The partial, or complete separation of the layers making up the laminate. May be used to reduce tension, print on the backing, or for other converting requirements.
A built-up roofing membrane failure characterized by separation of the felt plies, sometimes resulting in wrinkling and cracking.
The separation of the inner plys in a panel due to the failure of the adhesive bond.
Debonding of laminate
subsurface separation of concrete into layers
The internal splitting of paper in the printing nip which occurs most on the heat-set web offset blanket-to-blanket presses. It is due to a weakness in the body paper or high ink tack. Separation of the ply bond of boards or laminated paper materials.
The separation of two or more materials generally bonded together with an adhesive, the separation of layers.
Parting of layers of a sheet of paper made on a cylinder machine.
The exfoliation of composite layers from each other. Separation of plies in a laminate due to adhesive failure. It includes the separation of layers of fabric from the core structure.
Physical Properties and Testing Separation of bonded layers in a laminate due to failure of the adhesive itself or at the adherend interface.
The separation of composite layers from each other.
When the surface of a finished part separates or appears to be composed of layers. Strata or fish-scale-type appearance where the layers may be separated.
The separation of layers of laminates through failure within the adhesive or of the bond between adhesive and laminate.
The separation of a laminate along the plane of it's layers. Also the separation of bonded insulation within the adhesive layer or at the adhesive interface.
The physical separation of one layer from another.
The condition of leather which has degraded, separating into grain and flesh layers; due to the incomplete penetration of the tan liquor when it was made [Thornton/Swann, 1983]. I'm told that sheep delaminates naturally. [Saguto
Term used to describe glass separating from the vinyl inner layer in a laminated part.
Defect in which tyre treads separate from the carcass. Also applies to the unwanted separation of fibreglass sheeting.
Separation or failure of the bond in laminate layers from each other or from another surface material.
Delamination refers to the separation of the coating from the substrate. It can also refer to separation between multiple layers of coating or even to cohesive failure of a coated part.
The separating of laminated layers of a material or system.
separating the layers
The separation of layers of a laminate from one another.
The separation of the surface veneer from the paper or other backing. This also refers to the separation of the component veneer sheet, strip or roll from the substrate.
The separation of the top piles of laminate from the base material.
A split in a laminated plastic along the plane of its layers.
The separation of the secondary backing from the primary backing.
The separation of ply layers due to adhesive failure or the separation of layers of fabric from the core structure. A delamination may be associated with bridging, drilling and trimming.
Separation of a layer of one material from another.
Separation of two layers of coating.
The horizontal separation of (2) materials due to a failure between the mating surfaces.
A separation between any of the layers of a base material or between the laminate and the conductive foil, or both.
A separation between any of the layers of the base of laminate or between the laminate and the metal cladding originating from or extending to the edges of a hole or edge of board.
The separation of layers in a laminate through failure of the resin binder or adhesive.
The separation of layers in a laminate, through failure within the adhesive, or at the bond between adhesive and laminate.
Separation of the panel face from the core, or a laminate from its substrate.
The separation of a ski's base or top sheet from its core, which is usually irreparable.
The failure of the bond between layers, as when windshield glass separates from the laminate, or when paint peels from the substrate beneath it.
Separation of layers of stone along bedding planes.
The loss of adhesion between two layers of paint, causing material to separate from the painted surface or substrate.
The process of disconnecting the layers of a composite.
The separation of the layers of a sheet of paper.
The separation of a material into layers, in a direction approximately parallel to the surface. For instance, a backing separating from an adhesive during unwind.
The separation of individual plies in a laminate or the separation of the vinyl substrate from the scrim.
The separation of the inner plys in a panel. This is typically caused by the failure of the adhesive bond.
The separation of a laminated plastic material along the plane of its layers.
This describes the separation of the individual plies in a laminate. Laminates are typically made of two or more plies that are fused together under combinations of heat, pressure, and adhesive. When a lamination comes apart, delamination has occurred.
In coach construction, a failure of the adhesive bond line, or of one of the individual components, within a laminated assembly (sidewall, roof, floor, etc.). Modern construction adhesives have reduced this problem.
A separation of the paper's surface.
The splitting apart or separation of layers, usually in the painted iris, when pigments used are incompatible to the acrylic.
The separation of layers. Substrate separates from the adhesive. EDGE SEAL - A description of the amount of lamination that extends beyond the material being laminated. Most common is 1/8" seal on all sides. A document with edge seal on all sides is water tight.
A failure of the bond between laminate and substrate in a composite board or panel.
A separation between plies with a material base, between a base material and a conductive foil, or any other planar separation with a printed board.
The separation of layers in a laminate substrate. The main cause of delamination is adhesive failure.
To split a laminated plastic material along the plane of its layers. Physical separation or loss of bond between laminate plies.
The separation of the layers of plywood sheathing due to exposure to moisture.
Separation of plies or layers of wood or other materials through failure at an adhesive joint.
(PCB) A separation of the different bonded layers within the PCB.
A separation or splitting of the tape such as separation of the backing into two distinct layers, separation between laminations of a tape consisting of more than one and backing, or the separation between filaments and backing of a filaments reinforced tape.
The separation of veneer in plywood through failure of the adhesive.
Separation of the secondary backing or attached cushion from the primary backing of the carpet.
Peeling off of thin broad layers of stone. Related to the inherent physical structure of the material.
The separation of felt plies in a built-up roofing membrane, sometimes resulting in wrinkling and cracking.
Tendency of a fabric to be pulled apart (layer separation) by normal surface forces or shear tensions.
A separation between plies within the base material, between the base material and the conductive foil, or both. Occurs both in PCBs and chip ceramic capacitors.
Separations or splitting, usually caused by lack of adequate or sufficient adhesion in laminating or plied goods.
The separation of layers in laminated wood or plywood because of failure of the adhesive, either within the adhesive itself or at the interface between the adhesive and the wood.
