|
|
Keywords:
Muzzle,
Firearm,
Noise,
Suppressor,
Dampen
Any of various devices to silence the humming noise of telegraph wires.
A device for silencing the report of a firearm shooting its projectiles singly, as a tubular attachment for the muzzle having circular plates that permit the passage of the projectile but impart a rotary motion to, and thus retard, the exploding gases.
A device fitted at a valves outlet to reduce and dampen the noise produced when the valve vents ( 2703)
A device used to reduce noise from the exhaust side of an engine. See: Exhaust. Search for exhaust design books on Amazon.co.uk
A small tube that is attached to the end of an airsoft to either increase the inter barrel length (by hiding it inside) or to dampen the noise from the airsoft.
A device used to eliminate chatter.
short tube attached to the muzzle of a gun that deadens the sound of firing
a tubular acoustic device inserted in the exhaust system that is designed to reduce noise
a combination of tuning chambers, baffle partitions and perforated and solid tubes designed to dissipate noise pulses while moving exhaust gases and vapor
a complete and economical solution and we will see if it can provide both low noise and efficient cooling plus overclocking
a device, often homemade, fitting over the muzzle that attempts to reduce noise by baffling the rapid escape of gases
a device that attaches to a firearm and reduces the level of the report by at least one decibel for at least one shot
a flange that mounts to the tip/end of your exhaust
an aftermarket video card cooler that is designed to not only cool your card better than ever before, but do it without producing extra noise
a device for reducing gas flow noise. Noise is decreased by tuned resonant control of gas expansion.
A device designed to muffle the sound of the discharging of pressurized gases exiting the muzzle. See also Suppressor and Sound Moderator.
A device attached to the muzzle of a firearm to reduce the noise of discharge.
Pan-like dryer attachments filled with acoustical foam that cover the dryer producer inlets to reduce noise levels.
A virtually prohibited device for attachment to a gun's muzzle for reducing (not silencing) the report. Better terms would be "sound suppressor" or "sound moderator."
|
