This exchanger is located in the circulation and refrigeration systems and transfers the heat from the circulation system to the refrigeration system.
A unit that transfers heat from one liquid (or vapor) to another without mixing the fluids. A condenser is one type of heat exchanger.
A device which allows for the transfer of heat from one fluid to another while both remain isolated from contact.
A unit in which the heat from one fluid (liquid or gas) is transferred to another. It usually takes the form of a bank of tubes carrying one (the primary) fluid flows. In the case of steam generators used in a PWR, both fluids are water, with the primary fluid circulating round the reactor and the secondary fluid circulating as steam through the turbine.
A heat exchanger is a plant, which transfers the thermal energy from one medium to another. Heat exchangers are very often used to utilize idle energy, e.g. of an exhaust gas, for pre-heating of combustion air and thus achieve a higher efficiency. In other cases, a circulating (radioactive) medium is not to leave the circuit and the energy is transferred to a medium harmless for further processing. Mostly tube or plate heat exchangers are used, whereat the heat transfer from one medium to the other takes place by means of heat conduction via the separating plate/tube walls.
a device within the fireplace that exchanges cold air in the room with heat generated from the firebox.
a module or piece of equipment used to transfer heat from one medium to another without contact between the media, such as from a chemical bath to a chiller.
Removes heat from an electronics assembly using air, liquid, or liquid vapor.
The compartment within a furnace system that separates the circulation air from the combustion air inside the furnace.
A device to rapidly cool wort. Usually copper tubing that has cold water running through it. Sometimes 2 tubes, one inside the other, with wort going through one and cold water going through the other.
A device full of cooling tubes in which water flows through to keep the hydraulic oil from getting too hot.
A mechanical device for quickly reducing the temperature of the wort.
Device used to remove heat from a component or system; e.g., a radiator and oil cooler are typical examples..
This is the "guts" of either means of heating your pond. Inside the RayPac Versa 155 there's a huge-bore stainles steel exchanger. It's fish safe no matter where you hold the TA and pH. It's also a $350 upgrade to the Versa which has a sticker price of about $1200 so it's pricey. The HydraTherm is nothing but a heat exchanger. It's full of tubes which carry the hot water from the boiler. There's a second pump which pumps water through the jacket around the tube array. The water passes by the tubes and picks up heat. The HydraTherms are all stainless construction. The silver ones are the 1999 design. The newer red ones are about the same price, and represent the 2000 upgrade with a jacket of red steel over a thick layer of insulation.
A refrigeration component used to transfer heat from one source to another.
A structure that transfers heat from the hot combustion gases inside the furnace heat exchanger to the circulating room air flowing across the exterior of the heat exchanger.
A device used to transfer heat from one substance to another. Heat exchangers can be air to air, air to liquid, or almost any combination.
A mechanical device used to rapidly reduce the temperature of the wort.
A mechanical system that allows the heat from outgoing exhaust air to be transferred to incoming fresh, air. This is achieved by constant fan-forced ventilation, using either flat-plate, or rotary exchangers.
Transfer heat from one fluid to another without the fluids coming into direct contact with each other
device that transfers heat from one liquid to another without allowing them to mix
a component that allows the transfer of heat from one fluid (liquid or gas) to another fluid
a device designed to efficiently transfer heat from one fluid to another
a device for moving heat from one fluid toanother
a device for moving heat from one fluid to another
a device for transferring heat from one fluid to another, where the fluids are
a device in which energy is transferred from one fluid to ano
a device in which two fluids (or one vapor) flow against the opposite sides of a solid boundary wall that separates them while permitting heat to pass from the hot to the cold fluid
a device that exchanges the heat from one fluid to another without a mixing of the fluids
a device that transfers heat between two fluids while ensuring the fluids do not mix
a device used in some radiant heat systems to separate dissimilar fluids, such as anti-freeze and water
a device used to transfer heat from one fluid to another while preventing the two from intermingling
an apparatus for exchanging heat between a fluid, usually one at a high temperature and one at a low temperature
a passive device, using no energy whatsoever
a specialized device that assists in the transfer of heat from one fluid to the other
A device, such as a coiled copper tube immersed in a tank of water, that is used to transfer heat from one fluid to another through a separating wall.
Tubes inside the boiler that transfer heat from the burning fuel to the boiler water.
usually considered to be that part of a furnace that transfers heat from burning fuel or electricity into air or other medium; also, it is any device in which heat is absorbed by one fluid from another fluid, such as a condenser, evaporator, or boiler
Device used to transfer heat from a warm or hot surface to a cold or cooler surface. Evaporators and condensers are heat exchangers.
A device inside a boiler that transfers heat from the burning fuel to the boiler water. The hot water in the boiler is then circulated to radiators, indirect water heaters, hydro-air coils, radiant floor tubing, or other heat-distribution devices.
a piece of equipment used for transferring heat from one liquid to another.
A piece of equipment used to transfer heat from one fluid (liquid or gas) to another or when two different types of liquid (water and oil) need to be heated. For example, when steam is used to heat air for space heating.
Device (e.g., a radiator) that is designed to transfer heat from the hot coolant that flows through it to the air blown through it by the fan.
A component or components that transfers heat energy from one medium to another. For example heat could be transferred, in a geothermal heat pump system, from water-to-air or from water-to-water and visa versa.
a device used to transfer heat, often through coiled tubing, from one fluid to another.
the part inside the furnace that heats up the air.
In air conditioners these are also known as the condenser and evaporator coils. It is where heat moves from a substance or surface with a higher temperature to a cooler temperature.
A device used to transfer heat from one medium to another. It allows fumes and the products of combustion to be vented away from the heated airflow in an indirect-fired heater.
The major part of the furnace that transfers heat into your home.
A device, such as an automobile radiator, used to transfer heat from a fluid or gas on one side of a barrier to a fluid or gas on the other side without bringing the fluids or gases into direct contact.
The chamber in a furnace or boiler which separates the heated household air or water from the burned flue gases.
A device attached to the oil reservoir to circulate water or air to keep oil at proper operating temperature.
A device used to transfer heat in a furnace.
A heat transfer system.
Device such as a radiator that transfers heat from one medium to another.
A device that transfers heat from outgoing stale air to incoming cold air. In warm climates, this process is reversed.
An area, box or coil where heat flows from the warmer to the colder fluid or surface.
Circulates air or water to maintain oil at operating temperature. ( http://www.heatexchangers.org)
This is a device for transferring heat energy from one medium to another. In a solar energy system as heated fluid or air from the collector passes through the heat exchanger, it transfers its heat load for immediate use or storage.
Located in the furnace, the heat exchanger transfers heat to the surrounding air, which is then pumped throughout the home.
A device that transfers heat from one substance to another.
Part of an air handler that provides a surface for heating or cooling air.
A piece of brewing equipment used for heating or cooling the wort or beer rapidly.
A device through which heat is transferred to a cold area or surface.
The part of a furnace that transfers heat to nearby air.
the part of the boiler or furnace used for transmitting heat from the flame to air or water for heating.
A device used to transfer hear from a fluid (liquid or gas) to another fluid, where the two fluids are physically separated (usually by metal tubing). Household examples of heat exchangers are heating radiators and the coils on your refrigerator and room air conditioner.
Device on a heater that transfers heat to the water.
Responsible for transferring heat from furnace burners to the blower. Rheem uses some of the finest heat exchangers in the industry with limited lifetime warranties on some models.
Is used to cool compressed air or gas. Designed to reduce the temperature and liquefy condensate vapors. ( 010)
An area of the stove designed to quickly transfer heat from inside the fire box into the room, before the heat goes up the chimney. The better the heat exchanger(s), the more efficient the stove.
Heat exchange is the method by which the unwanted heat is removed from a system. A heat exchanger is a device by which energy (in the form of heat) is transferred from one fluid or gas to another across a solid surface.
This is a device that enables furnaces to transfer heat from combustion safely into breathable air. The primary heat exchanger transfers heat from combustion gases to the air blowing through the ductwork. It's vital that none of the combustion gas itself gets into the airstream. The primary heat exchanger handles the hottest gases. In high efficiency furnaces, secondary heat exchangers recover heat that used to be vented up the chimney with the exhaust gases. By recovering this heat, the furnace becomes more efficient. Part of the heat recovered here causes the water and acid to condense out of the exhaust gas. Because this liquid is corrosive, secondary heat exchangers must be designed to prevent deterioration. Usually this means they are made of stainless steel or some derivative of it.
A structure that transfers heat from one gas or liquid to another gas or liquid. For example, the hot combustion gases in a furnace to the circulating household air or, in a boiler, to the circulating hot water.
A device located inside the heater providing for the transfer of heat from the heat source to the water. This is usually a series of metallic tubes with fins located just above the flames.
a device designed to transfer heat between two different materials (hot and cold liquid, liquid and air, liquid and soil, or hot and cold air) while maintaining a physical separation between the two materials.
A component in which heat is transferred from one medium (such as coolant) to another (such as surrounding air) through conduction.
a device in which heat is transferred by conduction through a metal barrier from a hotter liquid or gas, to warm a cooler liquid or gas on the other side of the metal barrier. Types of heat exchangers include "shell and tube," and "plate."
A device that transfers heat from one source to another. For example, there is a heat exchanger in your furnace - the propane flame and combustion products are contained inside the heat exchanger that is sealed from the inside area. Inside air is blown over the surface of the exchanger, where it is warmed and the blown through the ducting system for room heating. The combustion gases are vented to the outside air.
A device that transfers heat from one fluid to another without a mixing of the fluids, such as air-to- water, water- to- water, or water- to- air.
A set of 8 or 10 ribbed copper tubes that absorb the heat produced below it and transfer it to the water cycling through its tubes.
Technically, any equipment used for the indirect transfer of heat. Conventionally, a specific piece of equipment used to conserve energy by transferring heat from a process stream being cooled to one being heated.
Device for transferring heat from a hot object to a colder object.
Often incorporated in the upper parts of a stove or fireplace, it absorbs and radiates additional heat from either a wood or gas fire.
An apparatus in which heat is transferred from one medium to another on the principle that heat moves to an object with less heat.
A device specifically designed to transfer heat between two physically separated fluids.
a fluid heat exchanger transfers heat from hot transfer-fluid to cooler water, thereby warming the water.
a device which transfers heat through a conducting wall from one fluid to another.
A device for the transfer of heat energy from the source to the conveying medium.
The device used to transfer heat in a furnace or boiler. Typically not fully visible.
device that passes heat from one substance to another; in a solar hot water heater, for example, the heat exchanger takes heat harvested by a fluid circulating through the solar panel and transfers it to domestic hot water.
fuel-oil cooler, to help cool the oil. The exchanger is a cylindrical oil chamber surrounded by a jacket through which the fuel passes. Heat from the oil is transferred to the fuel by conduction.
An apparatus used to transfer heat from one medium to another or used to remove heat from or add heat to a fluid.
A device used to cool or warm solutions and/or blood during extracorporeal circulation procedures.
A device that transfers heat from one medium to another.
A device such as a coil or radiator that is used to transfer heat between two physically separate fluids.
Apparatus, which transfers heat from one fluid to another in cooling or heating systems. Air conditioners use both a condenser and an evaporator. Steam and hot water radiators are heat exchangers, which are used to produce heat.
A device for transferring thermal energy from one fluid to another.
A heat exchanger is a device built for efficient heat transfer from one fluid to another, whether the fluids are separated by a solid wall so that they never mix, or the fluids are directly contacted. They are widely used in refrigeration, air conditioning, space heating, electricity generation, and chemical processing. One common example of a heat exchanger is the radiator in a car, in which a hot engine-cooling fluid, like antifreeze, transfers heat to air flowing through the radiator.