Definitions for "Fillet"
Keywords:  boneless, lean, loin, meat, filet
A piece of lean meat without bone; sometimes, a long strip rolled together and tied.
The loins of a horse, beginning at the place where the hinder part of the saddle rests.
In fish, a slice of meat without bones, cut out for human consumption
A little band, especially one intended to encircle the hair of the head.
A thin strip or ribbon; esp.: (a) A strip of metal from which coins are punched. (b) A strip of card clothing. (c) A thin projecting band or strip.
A narrow flat member; especially, a flat molding separating other moldings; a reglet; also, the space between two flutings in a shaft. See Illust. of Base, and Column.
A concave filling in of a reëntrant angle where two surfaces meet, forming a rounded corner.
A concave corner piece used on foundry patterns, a radius joint replacing sharp inside corners.
(n) A rounded interior corner normally found on cast, forged, or molded parts. Like a round, a fillet can indicate that a surface is not machine finished. A fillet is indicated on engineering drawings as a small arc.
a bundle of sensory nerve fibers going to the thalamus
(ribbon or band)—A bandlike bundle of fibers. Lateral F., or lemniscus, a tract from the auditory centers, terminating in the posterior colliculus, and in the medial geniculate body. It carries auditory impulses. Medial F., a tract composed of axons of the nucleus gracilis, nucleus cuneatus, and the nuclei of common sensation and taste in the medulla; it terminates in the lateral nucleus of the thalamus, after giving off certain branches during its course.
Keywords:  scantling, batten, smaller
Any scantling smaller than a batten.
Keywords:  circlet, unadorned, plain, wheel, tool
a plain circlet, thin and unadorned
A continuous plain line produced by a wheel-shaped finishing tool of the same name.
Solder between two metals in a joint.
A solder fillet is the build up of solder between the solder land and the component terminal.
Keywords:  lug, sill, perimeter, sash, broken
A uniform border around the perimeter of a window. Designed to be broken out of the window to facilitate the windows removal. The most common instance is in a stone window setting.
Continuous raised lug at the top back edge of a window sill. It serves as a moisture barrier and as a seat for the window sash.
Keywords:  adorn, furnish, bind
To bind, furnish, or adorn with a fillet.
Keywords:  oblong, profiled, mat, planed, constant
An oblong piece of wood with constant (and relatively small) cross-section, normally shaped to fit against a planed surface and most frequently profiled
A small molding with profile that may be used as an edging on a mat or frame lip. Profiles may differ somewhat. May also be called a slip.
Keywords:  brazing, filler, radius, joined, joint
A radius region of brazing filler metal (located at the face of a joint) where work pieces are joined.
Keywords:  pronunciation, different
Just a different pronunciation from the U.S. (fil-ay).
Keywords:  infill, pallets, component, way, base
Infill component used on base of two way pallets.
Application and Use Portion of an adhesive that bridges the adherends outside the bond line.
An ordinary equaling in breadth one fourth of the chief, to the lowest portion of which it corresponds in position.
Debris (soil) piled against a rock; several scientists have suggested that the volume of the fillet may be directly proportional to the time the rock has been in its present position and to the rock size.
Keywords:  spacer, contact, glass, framing, paper
In framing, any spacer device that is placed between the paper and the glass to prevent contact.
Keywords:  screw, thread
The thread of a screw.
Keywords:  bracketing, another, term
Another term for bracketing
Keywords:  geometric, lace, decorate, designs
decorate with a lace of geometric designs
Keywords:  coiled, clay, pot, rope, walls
rope of clay that is coiled on a base to create the walls of a pot.