Definitions for "Dot Pitch"
Related Terms:
Pixel pitch, Stochastic screening, Fm screening, Dot, Halftone screen, Pixels, Anti-aliasing, Lines per inch, Jaggies, D.p.i, High resolution, Dots per inch, Resolution, Dpi - dots per inch, Dpi, Pixel, Lpi, Antialiasing, Screen , Output resolution, Screen frequency, Line screen, Pixelization, Moiré patterns, Print resolution, Halftone, Screen ruling, Picture element, Spatial resolution, Screen resolution, Error diffusion, Moire pattern, Pel, Pixelated, Low resolution, Dead pixel , Raster, Raster image, Smoothing, Anti aliasing, Anti-alias, Halftoning, Interpolated resolution, Svga, Picture, Scanline, Image resolution, Rasterization, Native resolution, Dot matrix
Dot pitch is the space between pixels. The smaller the number, the sharper the image will appear. (.28mm is better than .32mm)
The amount of space between pixels in a monitor. The lower the number, the higher the monitor quality.
Refers to the width of a displayed dot on a raster display device. Often used to describe the capability of a screen or monitor (measurement is usually in millimetres -- e.g., .28 is 28/100ths of a millimetre).
The smaller the better, as it relates to CRT monitors. The dot pitch is a measure of distance between phosphor dots of the same color on a CRT monitor....
The distance between adjacent pixels on a screen, usually measured in millimeters.
distance between dots on a monitor screen. Several ways to measure. May be measured from center to center between nearest dots or between dots of the same color (for color monitors). May be measured from center to vertical line through nearest dot of same color - a shorter distance than center to center.
The (center to center) spacing between phosphor dots or stripes of the same color on a display screen. The smaller the better for picture sharpness, 0.28 mm is considered the minimum acceptable for a good computer display, while a typical 20" TV has an 0.81 mm dot pitch and large screen TV's have larger dot pitches. Many TV screens use vertical stripes rather than dots in which case the dot pitch applies only in the horizontal direction.
A color monitor characteristic; specifically, the distance between the holes in the shadow mask. It indirectly describes how far apart the individual dots are on screen. The smaller the dot pitch, the finer the image's "grain." Some color monitors, such as the Sony Trinitron, use a slot mask (also known as an aperture grille) that is perforated by strips, not holes, in the shadow mask. In this case, the dots are arranged in a linear fashion, and their density is called striped dot pitch. (Monochrome monitors do not use a shadow mask and therefore do not have a dot pitch.)
the distance in millimetres between the holes in the shadow mask inside of your monitor (or between the wires if your monitor uses an aperture grill). All other things being equal the smaller the dot pitch, the sharper the image.
The distance between pixels (picture elements) in a display. In a CRT for HDTV, the dot pitch is typically 0.25 – 0.3 mm. For full resolution HDTV display approximately 14 00 pixels are required across the screen.
This is the measurement used to determine how sharp the display of a CRT (C...
Distance between two dots of the same color on screen. Larger the dot pitch the fuzzier, grainier the image. Smaller the dot pitch, i.e. .26mm as opposed to .28mm, the clearer and sharper the image.
A metric used to describe how sharp an image is on a particular monitor. The distance, in millimeters, between the holes in the shadow mask. Smaller numbers are better.
A measure of a display's sharpness. Dot pitch is measured in millimeters (mm), and a smaller number means a sharper image.
The smallest size dot that a monitor can display, usually measured in millimeters (mm). Typical dot pitches for monitors are .41mm, .31mm, and .28mm. The smaller the dot pitch, the sharper the resolution on the monitor. Also used to describe the distance between two color dots of the same color on a color monitor.
In CRTs, the distance from one pixel to the next-nearest one. The larger the dot pitch, the grainier an image looks.
The distance between a dot and the closest dot of the same colour (red, green or blue) on a colour CRT display/monitor (CRT displays have a television-like picture tube). Dot pitch is typically ranges from 0.28 to 0.51. The smaller the dot pitch, the crisper the image.
The distance between the triads, measured in tenths of a millimeter. Each set of triads in the monitor is separate from the next, which is called the dot pitch. The shorter the distance, the better the resolution and the crisper the image.
A monitor's dot pitch is the distance in mil#006000 ters (mm) between the centers of the phosphor s on a computer monitor. The smaller the dot pitch, the sharper the image will be, when displayed on the monitor. Common dot pitches: .51mm, .31mm, .28mm, .26mm, .25mm, .24mm
specification for image sharpness on a display monitor
Physical distance between light-producing phosphors on a monitor screen. Measured in millimeters, from 0.25mm to 0.31mm. Lower numbers (phosphors closer) display a clearer, crisper image.
Dot pitch is the amount of (empty) space surrounding each pixel on a computer monitor. The smaller the dot pitch rating of a monitor, the closer the pixels can be displayed together and the sharper the resulting image. Typical dot pitch ratings are .26, .32, .45, etc., with the smallest number being the best quality.
The distance in millimeters between individual dots on a monitor screen. The smaller the dot pitch the better, since it allows for more dots to be displayed and better resolution. The dot pitch defines the reaslution of a monitor. A high-resolution CCTV or computer monitor would have a dot pitch of less than 0.3 mm.
A measurement that indicates the diagonal distance between like-colored phosphor dots on a display screen. Measured in millimeters, the dot pitch is one of the principal characteristics that determines the quality of display monitors. The lower the number, the crisper the image. The dot pitch of color monitors for personal computers ranges from about 0.15 mm to 0.30 mm. Another term for dot pitch is phosphor pitch.
a measurement, usually in millimetres, that indicates the diagonal distance between like-coloured phosphor dots on a monitor. The lower the number the higher the image intensity.
The distance between one phosphor dot and the nearest dot of the same color in the line above or below.
The distance (in millimeters) between on phosphor dot to the nearest phosphor dot of the same color in the line above or below. As the dots get closer together, the dot pitch decreases making the images sharper and clearer.
See Pixel Pitch.
The space in millimeters between the pixels that form a monitor's display; smaller numbers yield sharper images.
Measured by the space between the monitor's mask holes (don't worry about what this means if you don't know), dot-pitch is the theoretical maximum detail a monitor is capable of attaining. The important thing to know is that monitors with smaller dot pitch will produce sharper text and graphics. Source: TechSoup.org
The distance, measured in millimeters, between pixels on a computer monitor. The smaller the dot pitch, the sharper the image. A comfortable dot pitch for viewing is between .28 and .31 millimeters.
An indication of the image quality of a monitor, it is the measurement of the distance between two phosphor dots of the same color on a monitor. The finer the dot pitch, the better the image quality (a dot pitch of .28 or smaller is generally considered good).
A measurement of the dots making up a pixel. Smaller the Dot pitch, the sharper the image will appear.
The vertical distance (measured in millimeters) between the centers of like-colored phosphors that are in adjacent pixels on the monitor screen. The closer the spacing, the better the resolution. Dot pitch is specified in pixels/mm.
For monitors, it indicates the distance between individual dots. The smaller the distance between dots, the sharper the image.
A measure of the distance between dots on the monitor screen. The smaller the dot pitch, the denser the image appears.
The distance between the dots that the electronic beam hits on a monitor screen.
distance in millimeters between two holes in the shadow mask of a monitor. A smaller dp is better, e.g. 0.28 mm is better than 0.36.
The distance between the dots on a CRT display. The closer together the dots are create a higher resolution of a displayed image.
(CRT Only) The distance between a dot and the closest dot of the same color (red, green or blue) on a color monitor, measured in millimeters (mm). A small dot pitch means sharper images. Aperature Grill (AG) is measured between pixel stripes.
The distance between a phosphor dot of one phosphor triad to its closest diagonal neighbour of the same colour on a monitor. Expressed in mm - i.e. .28 dot pitch means .28 mm between triads. A smaller value indicates that the phosphor dots are more closely spaced, and that the resulting image displayed will be crisper.
The image on a monitor is composed of red, green and blue dots. The closer the dots, the higher the resolution. The distance between two dots of the same colour is called the Dot Pitch.
The distance between the centers of adjacent pixels on a display.
The distance of one phosphor dot in a CRT to the nearest phosphor dot of the same color on the adjacent line.
Used to describe the horizontal size of pixels on CRT and LCD displays. The smaller the dot pitch (for example 0.26mm) the better the resolution of the display. [image
The distance between the dots on a computer monitor, typically 0.24 to 0.38 mm. The closer the dots the sharper the image on the monitor.
The distance between each pixel on a display, used as a measure of image clarity; sometimes called pixel pitch. The smaller the distance between the pixels, the sharper the image. Text created with a smaller dot pitch is easier to read. 6.9
Measures the space between the centers of physical pixels on a monitor.
Distance of one pixel in a CRT to the next pixel on the vertical plane. The smaller the number, the higher quality display.
Dot pitch (sometimes called line pitch or phosphor pitch) is a specification for a computer display that describes the distance between phosphor dots (sub-pixels) or LCD cells of the same color on the inside of a display screen. Thus, dot pitch is a measure of the size of a triad plus the distance between the triads.