Is a physical layer standard for 10BASE-T, Ethernet, and Starlan.
The IEEE standards committee defining Ethernet networks.
The Institute for Electrical and Electronics Engineers standard for Ethernet networks.
Physical cabling layer standards for Ethernet
A standard for a broadcast local area network published by the Institute for Electrical and Electronics Engineers (IEEE). This standard is used for both the ThinLAN and ThickLAN implementations of the Local Area Network (LAN).
IEEE standards for local area networks (LANs) and metropolitan area networks (MANs). The IEEE specification for LANs breaks the data link layer into two sublayers: the LLC (Logical Link Control) and MAC (Media Access Control). The LLC provides a common interface to the MAC layers, which specify the access method used. CSMD/CD ethernet. (Carrier Sense Multiple Access/Collision Detection) The LAN access method used in Ethernet. When a device wants to gain access to the network, it checks to see if the network is free. If it is not, it waits a random amount of time before retrying. If the network is free and two devices access the line at exactly the same time, their signals collide. When the collision is detected, they both back off and each wait a random amount of time before retrying.
CSMA/CD-MAC protocol developed by IEEE 802 Committee.
IEEE Standard for LAN/MAN CSMA/CD Access Method Wikipedia
Specifies CSMA/CD network, such as Ethernet.
The Institute of Electrical and Electronic Engineers is an information exchange, publishing, and standard-making body responsible for many standards used in Local Area Networks, notably the 802 series.
is a physical layer standard for 10 Base T, 100 Base T, Ethernet, and 1000 Base CX (Gigabit Ethernet).
IEEE Working Group for CSMA/CD, the protocol used in Ethernet transmissions.
IEEE LAN protocol specifying an implementation of the OSI reference model's physical layer and MAC sublayer of the link layer. IEEE 802.3 utilizes CSMA/CD access at a variety of speeds over a variety of physical media. One physical variation of IEEE 802.3 is very similar to Ethernet.
Ethernet LAN specification.
Usually referred to as Ethernet.A networking protocol. .
Defines the MAC layer for bus networks that use CSMA/CD. This is the basis of the Ethernet standard. Also see the Ethernet Designations chart in the Quick Reference section of Webopedia.
Standards for Ethernet cabling systems.
The IEEE's specification for Ethernet, including both physical cabling and layer-two protocol.
The IEEE (Institute of Electrical and Electronic Engineers) standard that defines the CSMA/CD media-access method and the physical and data link layer specifications of a local area network. Among others, it includes 10BASE2, 10BASE5, 10BASE-FL and 10BASE-T Ethernet implementations.
The physical and medium access control standards developed by the Institute of Electrical and Electronics Engineers for CSMA/CD (Carrier sense Multiple Access with Collision Detection) local-area networks, such as Ethernet.
IEEE LAN protocol that specifies an implementation of a physical layer and the MAC sublayer of the data link layer. IEEE 802.3 uses CSMA/CD access at a variety of speeds over a variety of physical media. Extensions to the IEEE 802.3 specification include 10BASE2, 10BASE5, 10BASE-F, 10BASE-T, and 10Broad36. Physical variations for Fast Ethernet include 100BASE-T, 100BASE-T4, and 100BASE-X.
IEEE LAN protocol that specifies an implementation of the physical layer and the MAC sublayer of the data link layer. IEEE 802.3 uses CSMA/CD access at a variety of speeds over a variety of physical media. Extensions to the IEEE 802.3 standard specify implementations for Fast Ethernet. Physical variations of the original IEEE 802.3 specification include 10Base2, 10Base5, 10BaseF, 10BaseT, and 10Broad36. Physical variations for Fast Ethernet include 100BaseT, 100BaseT4, and 100BaseX.
The IEEE’s specification for CSMA/CD LANs.
the IEEE standard for Ethernet networks; in full, ANSI/IEEE Standard 802.3. It includes rules for configuring Ethernet LANs, the types of media that can be used, and how the elements of the network should interact. http://grouper.ieee.org/groups/802/3/index.html
IEEE 802.3 is a collection of IEEE standards defining the physical layer and the of the data link layer of wired Ethernet. This is generally a LAN technology with some WAN applications. Physical connections are made between nodes and/or infrastructure devices (hubs, switches, routers) by various types of copper or fiber cable.