A thin sheet of wood cut on a lathe or slicing machine. There are three kinds: sawed, sliced, and rotary cut.
a thin layer of wood applied to an edge or surface to cover defects or inferior wood.
A veneer is one ply or one thickness of a material, such as wood veneers bonded together to make plywood. In siding, there are brick and stone veneers.
A veneer is a thin sheet of wood sliced, sawn, or rotary-cut from a log. When assembled it is referred to as a “ply”.
The method of decorating the exterior of furniture with a thin slice of a quality timber. Veneer cutting was a skill developed on the continent of Europe and became fashionable in England from circa 1650. Veneer was originally cut by hand using a saw, later, during the 19th Century it was cut by machine.
Thin sheets of high quality, fine-grained wood fiber that is used for furniture, flooring and paneling. Veneer is produced from a process that entails peeling large diameter logs.
Veneer is a term more usually associated with furniture, but it is also used to describe the thin surfacing laminate materials that are used to surface countertops. Furniture veneers are thin layers of wood laminated to lesser quality wood or other substrates.
A very thin leaf of wood that is used to cover doors or articles of furniture which are made of a low grade wood.
Thin sheet of material, usually of wood or plastic that is attached, laminated, to a stronger, less costly material.
Thin continuous sheet of wood peeled or cut from a log; used in plywood manufacture and as a facing material for furniture
Very thin sheets of finely grained or coloured woods used to decorate panels on doors and wainscoting, and to form bands or other patterns, which is a form of inlay, and also for coating the whole surface of commoner or stronger woods. Veneers of marble, lapislazuli, and other fine stones are also used in the same way.
A thin layer of superior wood or ivory that is glued onto an inferior, coarser base wood for decorative purposes.
A thin sheet of wood applied to furniture for decorative effect.
In the construction of crowns or bridges, a layer of tooth-colored material.
A thin layer of expensive wood bonded to a thicker piece of cheaper plywood to give the appearance of the expensive wood but at a reduced price.
A thin sliced wood used to cover wood. Veneer is often used in tread ends and stair stringers.
Thin layer of high-quality wood permanently bonded to a frame of less expensive wood. Veneer is also used in decorative work, such as inlays.
Thin wood sheets applied to a furniture surface to create decorative inlay patterns of wood grain.
A bonded covering of either porcelain or resin to cover the front portion of the tooth.
Decorative effect accomplished by the application of thin layers of ornamental and often exotic woods to an underlying structurally supporting surface.
Thin sheet of fine wood or other material attached on top of and flush with an underlying layer that is usually of lesser quality, for decoration. As a verb: the act of adding this type of decoration. (See inlay, marquetry, and parquetry).
Wood peeled, sawn, or sliced into thin sheets of a given thickness. Heavily used in the furniture industry as well as the plywood industry.
Thin slice of wood sawn or rotary cut for laminating. Veneer is usually cut from the most desirable species.
A very thin layer used as a facing.
A thin sheet of wood glued to various cabinet parts. The stronger, but plainer-looking core wood is invariably first covered with "cross banding" glued at right angles to its grain, and then the cross banding is covered with fancy veneer with the grain running parallel to the core. This sandwich greatly strengthens a cabinet against cracking and warping. Marquetry consists of small pieces of veneer of various grain patterns and colors inlaid flush into the surface of the surrounding veneer to create various designs, borders, etc.
A layer of bricks or stones that serves as a facing.
a layer natural building stone facing material used to cover a wall.
Thin sheets of wood, such as the layers in a piece of plywood.
A thin sheet of wood used to cover the surface of furniture and architectural woodwork.
Thin leaf of wood applied onto panel or frame of solid wood. It displays richly grained effects inexpensively. Common veneers are rosewood, maple and mahogany.
A thin facing of finishing material
A thin wood layer of uniform thickness. Depending on its intended use, it may range in thickness from 1/20†to 1/50â€. Veneers provide durability and decorative options for wood furniture.
Thin sheet of wood, sliced or sawn from a log, bolt or flitch that is normally bonded to a panel's interior substrate.
An artificial filling material, usually plastic, composite, or porcelain, that is used to provide an aesthetic covering over the visible surface of a tooth. Most often used on front teeth.
a very thin sheet of timber of other material attached on top of an underlying layer for the purpose of decoration.
A decorative covering of brick, wood, stone, or other material over rough construction, used to simulate more substantial or expensive construction.
A thin, widespread layer of sediment covering an older surface.
the thin layer of wood laminated on top of another
Thin slices of wood cut through the cross or vertical section of a log then glued together at right angles over a thick central core, resulting in a stronger piece of furniture that responds less to environmental changes. This process also produces a fairly identical grain that can be matched in various ways to create interesting surface patterns.
A thin layer of wood, usually of fine quality, that is bonded to a heavier surface of lesser quality wood. Most new furniture is made of veneer construction.
An artificial covering over the visible surface of the tooth for aesthetic purposes. It is often made of composite, plastic, or porcelain and is most often used on the front teeth.
A thin facing material that is applied over a structural base. A veneered door, for example, may have a hollow or solid wood core and a thin surface layer of fine hardwood.
A thin layer of wood (1/32") of solid wood that is applied with an adhesive to a substrate.
Wood peeled, sawn, or sliced into sheets of a given constant thickness and combined with glue to produce plywood or laminated-veneer lumber. Veneers laid up with the grain direction of adjoining sheets at the right angles produce plywood of great stiffness and strength, while those laid up with grains running parallel produced flexible plywood most often used in furniture and cabinetry.
A thin sheet of wood, rotary cut, sliced, or sawn from a log or flitch from a thickness of 1/100" up to 1/4".
A thinly sliced layer of wood applied to a substrate.
thin, custom-made shells of tooth-colored plastic or porcelain that are bonded directly to the front side of natural teeth to improve their appearance – for example, to replace lost tooth structure, close spaces, straighten teeth or change color and/or shape.
Thin slices of fancy-figured or exotic wood used to cover a base or ground wood. Veneers are used variously to construct, conceal, and embellish. Veneers are used in marquetry and inlay as both surface and inset decoration.
Thin sheets of wood which are bonded to a reconstructed wood product.
A thin layer of wood permanently bonded to a thicker core. The most beautiful grain patterns are used for the outermost layer (or face veneer) of furniture piece, greater strength is achieved by bonding woods at right angles to each other.
Thin layer of wood glued onto the surface of another, thicker piece of wood or wood composite.
A porcelain facing placed on an anterior tooth. With the recent boom in esthetic dentistry, veneers are commonly being used to improve smiles.
A thin slice of timber cut from the solid, either hand cut or machine cut from mid 19th c.
thin slice of expensive and often exotic timber applied to an inexpensive secondary timber using glue
Any kind of thin wood or brick finish which is attached to the exterior of an item, be it a wall or a piece of furniture.
a very thin sheet of decorative wood shaved from a large piece of wood
A thin top layer of decorative wood applied to a body of less attractive timber.
Shell of porcelain or plastic placed on teeth to improve the aesthetic appearance. Works in the same way as a false fingernail.
A thin layer of material; wood, plastic, metal, etc. as glued to a substrate material for strength and/ or decorative features.
Thin sheets of wood placed over another material. Back to the Top
Thin sheets of wood made by rotary cutting or slicing a log.
a thin sheet of wood of uniform thickness, produced by rotary cottoning (peeling) or slicing, and sometimes by sawing
A thin layer of material applied to a structural substrate.
A thin sheet of wood, rotary cut, sliced or sawn from a log or flitch. Veneering goes back to the early days of the Egyptians, about 3,500 years ago. Down through the years and cultures, veneering has enriched furniture and architectural interiors with sheets of rare and beautiful woods bonded to other plain, sturdy wood based substrates to form a panel.
A layer of tooth-colored material (can be porcelain, composite, or ceramics) attaches to the front of the tooth. It is usually for better outlook of the tooth.
a thin layer or sheet of wood material either peeled or sliced from a length of log.
1. A thin layer, sheet or facing. 2. A thin layer or sheet of wood; usually one that has beauty or value and is intended to be overlaid on an inferior surface. 3. Nonstructural facing of brick, concrete, stone, tile, metal, plastic or other similar approved material attached to a backing for the purpose of ornamentation, protection or insulation.
A very thin layer of wood for facing or inlaying wood.
Any decorative, non-structural surface layer.
Plastic or porcelain facing bonded directly to a tooth to improve its appearance. See laminate.
Any of the thin layers of wood glued together to make plywood.
thin sheets of wood or other material, such as brick or plaster, usually covering less costly material veneered construction the placing of a facing material over the external surface of a structure
This less expensive finish consists of thin slices of real wood, which are adhered to a surface to give it the glowing appearance of real wood. This also allows each piece to have the same grain direction and coloring.
thin layer of wood for exquisite beauty; a layer of wood of superior value or excellent grain
(1) A single wythe of masonry for facing purposes, may not be structurally connected; (2) Any of the thing layers of wood glued together to form plywood.
a resin or porcelain facing that is placed over the surface of the tooth to improve the appearance of the teeth.
are thin sheets of wood glued together to make plywood.
A thin sheet of wood, rotary cut, sliced, or sawed from a log, bolt, or flitch. Veneer may be referred to as a ply when assembled into a panel.
A thin layer of wood, produced by peeling or slicing, used for decorative purposes. Veneers are usually applied to less expensive or less attractive substitutes including solid timber, woodbased sheet materials, etc.
The art of gluing a thin layer (1/8 of an inch or less) of decorative wood to a thicker backing for substance. Veneering began chiefly for cheapness as importing exotic woods was expensive. The art goes back to ancient Egypt and Rome but was not seen in England before the late 17th Century.
A layer of tooth-colored material, usually porcelain or acrylic resin, attached to and covering the surface of a metal crown or natural tooth structure.
A thin sheet of wood applied to a piece of inferior wood or plywood. Fine wood veneer is used in furniture. This allows you to use rare and exotic woods, which either are not available in solid form or would be too expensive.
Refers to thin wood or plastic laminate used in the construction of some guitars.
A thin layer of fine wood glued to a more common type wood or a manufactured wood, such as particle board, to give a finer quality appearance. It hides imperfections in the common wood.
BRICK, STONE, SIDING, STUCCO, OR ANY OTHER MATERIAL USED AS THE OUTER SURFACE OF A FRAMED WALL.
Wood or brick exterior that covers a less attractive and less expensive surface.
A thin layer of wood applied to the surface of another, usually cheaper, material.
A thin decorative layer of wood which is applied to underlying wood solids or particleboard. Veneers are used to match and balance grain, create inlay and banding effects.
Thin sheets of wood used to cover cabinet surfaces. This is done usually to showcase the surface wood, often an exotic or expensive species.
A thin film or facing, adhesively bonded to a core or substrate, which makes up the exposed and decorative face of an assembly.
An overlay of a thin layer of wood often used to finish or decorate a piece of furniture.
is one ply or one thickness of something; in siding there are brick and stone veneers, there are also veneers of one wood bonded to another
Thin sheets of wood applied to the surface of furniture for decorative effect.
a thin layer or sheet of wood that typically covers a less-expensive wood and is used for a decorative effect.
A thin sheet or layer of wood, usually rotary-cut, sliced or sawn from a log, bolt or flitch.
Material of a better quality used to cover a lower quality surface to make it look better. Usually used on the exterior, bricks would cover concrete or better wood over cheap.
A thinly-cut slice of decoratively-marked wood glued to a stronger, thicker, solid wood or plywood backing.
Thin sheets of wood applied to a furniture surface.
A thin layer of decorative wood laminated to the surface of a more common wood. Home Improvement Encyclopedia
Thin-cut layer of beautiful grain patterned, fine quality, wood inlay, permanently bonded to an object for enrichment of strength, pattern and finish (See also inlay, marquetry, and parquetry).
A thin, finely finished exterior that effectively conceals the underlying substance; e.g., a mortician's smile or the civility that prevails at a Hollywood party.
A thin layer of decorative wood, or sometimes tortoiseshell or ivory, glued over a wooden body or carcass. Veneering was practised in ancient Egypt, Greece and the Roman Empire, and rediscovered in the early 17thC.The craft came to Britain from Holland a few decades later, and by the 18thC French and British cabinet-makers had raised it to a fine art. They cut woods such as walnut, satinwood and rosewood to make fullest possible use of grain and colour. The thickness of a veneer depends on the quality of the wood and how it is cut; generally 18thC hand-sawn veneers are 1/16in (1.6 mm) thick; 19thC circular saw veneers, 1/32in (0.8 mm) thick, and the veneers produced by the machine-powered tools of the late 19thC are thinner still. See burr.
a thin sheet of often expensive wood cut up to make decorations on furniture, boxes, etc
Covering with sheets of metal, wood or other material.
In dentistry, a veneer is a thin layer of restorative material placed over a tooth surface, either to improve the aesthetics of a tooth, or to protect a damaged tooth surface. There are two types of material used in a veneer, composite and porcelain. A composite veneer may be directly placed (built-up in the mouth), or indirectly fabricated by a dental technician in a dental laboratory, and later bonded to the tooth, typically using a resin cement such as Panavia.