Definitions for "Heel"
The latter or remaining part of anything; the closing or concluding part.
The part of a thing corresponding in position to the human heel; the lower part, or part on which a thing rests
The uppermost part of the blade of a sword, next to the hilt.
To lean or tip to one side, as a ship; as, the ship heels aport; the boat heeled over when the squall struck it.
The after end of a ship's keel.
The lower end of a mast, a boom, the bowsprit, the sternpost, etc.
Keywords:  shoe, boot, hinder, foot, toe
The hinder part of the foot; sometimes, the whole foot; -- in man or quadrupeds.
The hinder part of any covering for the foot, as of a shoe, sock, etc.; specif., a solid part projecting downward from the hinder part of the sole of a boot or shoe.
To add a heel to; as, to heel a shoe.
Keywords:  guy, hated, wrestler, bad, rulebreaker
a bad guy wrestler
a wrestler who assumes a hateful personality in the ring
The bad guy. Example: "Jeff Jarrett is the worst heel of all time."
Keywords:  hounds, fox, backward, wrong, huntsman
To hit (the ball) with the heel of the club.
Hounds following a line the wrong way, backwards.
Backward; hounds following the line the wrong way are running “heel.
The point on a truss at which the top and bottom chords intersect, usually occurring at support.
To place cheques unevenly, so that one protrudes at the bottom of the stack.
The bottom of a Brush's bristles where they enter the handle
Keywords:  beside, neck, guitar, dog, walk
The portion of an instrument's neck that curves downward where the neck joins the body.
the reinforced section of the guitar neck where it joins the body.
Standard "walk beside me with your neck/head roughly even with my leg" command. Also: sit next to me when I stop walking. Currently working on having her move to heel position, sitting, when the command is given after "come". (also off-lead) See also: OK
The lower end of a timber in a frame, as a post or rafter. In the United States, specif., the obtuse angle of the lower end of a rafter set sloping.
The Heel end of a ring gear is on the outside diameter of the gear.
(1) The liquid left in a filter shell at the end of a cycle; (2) The precoat left on R.V.P.F. at the end of its cycle.
1. The part of a rifle or shotgun stock at the top of the butt end. 2. The rear portion of a bullet.
Back end of the upper edge of the buttstock at the upper edge of the buttplate or recoil pad.
The trailing edge of the land.
Management by the heel, especially the spurred heel; as, the horse understands the heel well.
a weapon fixed to a cock or stag's spur, the heel is used in a cockfight.
Keywords:  lurch, nob, muggins, cribbage, skunk
a jack starter card, worth 2 points to the dealer kitty another word for the crib leg one side of the cribbage board, 30 holes long lurch another word for skunk muggins points transferred to the other player due to an error in counting or pegging nineteen (points) a hand worth zero; the expression arises because it is impossible to construct a cribbage hand worth 19 points nob ( also called his nibs) a jack of the same suit as the starter card, worth one point in counting the hand
Expressions , Maneuvers Heeling-error Navigation , Expressions
Keywords:  bark, shoot, stem, torn, main
The part of the stem that joins to the main stem; when a stem is torn from a larger branch a 'heel' of wood will remain at the end of the stem where it had been attached to the parent.
A strip of bark and wood remaining at the base of a side shoot cutting pulled off a main shoot. Some cuttings root more readily if a heel is attached.
when pulling a side-shoot away from the main stem an expanded base of old wood or stem pulls off with the side-shoot.
Keywords:  reversa, cyma, workmen, called
A cyma reversa; -- so called by workmen.
Keywords:  calk, ringers, horseshoes, pit, hooks
The area of the horseshoe (at the open end) that includes the “tips” and the “hooks". (See drawing on back cover) Hooks – Refers to a tool used, by some, to pick up horseshoes from the pit. May also refer to a portion of the heel calk, designed to secure ringers. (See I – EQUIPMENT SPECIFICATIONS, Section E)
In ion exchange applications, the lower zone of the ion exchange bed that is "passed by" in either the softening, deionization, or dealkalization mode or during the application of regenerants.
A professional shoplifter; see booster.
Keywords:  ladle, pouring, tapping, furnace, left
In respect of a controlled substance, means the residual quantity left in a container after it has been emptied and that does not exceed 10% of the total capacity in weight of the container for that controlled substance.
Metal left in a ladle after pouring, or in a furnace after or between tapping.
Anything regarded as like a human heel in shape; a protuberance; a knob.
Keywords:  gaff, fighting, cock, arm
To arm with a gaff, as a cock for fighting.
Keywords:  slenderizing, instant, thing
an instant slenderizing thing
Keywords:  nice, spiral, fit, kitchener, round
the piece of leather that fits the heel
a round ball and the spiral decreases really fit nice and no kitchener
Keywords:  dance, perform, running
To perform by the use of the heels, as in dancing, running, and the like.
perform with the heels; "heel that dance"
Keywords:  dam, upstream, foundation, contact
The upstream contact of a dam with its foundation.
Keywords:  eaves, joint, see
The point of the handle that turns from horizontal to vertical in the direction of the shank. Known by some as a "square curve" to describe the look of this transition.
Keywords:  cheap, poker, good, player
A cheap poker player or anyone who is not good.
Keywords:  upwards, corner, firing, position, arm
In a small arm, the corner of the but which is upwards in the firing position.
In the process industry, an item used in the manufacture of itself. For example, in the manufacture of plastic, the ingredients will include the parent as well as the components.
A small portion of the previous year's growth at the base of a cutting.
Keywords:  follow, person
follow at the heels of a person